Have a beautiful lawn in only 5 steps !

Preparation of the ground, sowing, passage of the roller … the 5 key steps for a beautiful lawn. For a beautiful lawn less water-hungry, opt preferably for grasses resistant to the dryness. To loosen the ground to the hobby machine before sowing the lawn. And be sure not to miss zero turn lawn mower reviews .
Cleaning the land

The use of a motor hoe over 100 m2, is usual to loosen the soil while pulling the grass in place that you will previously mowed very short. The ground should be neither too wet nor too dry and the weather should announce a sunny period.

Make two crossings at very low speed to take the time to root out. If the strawberries turn too fast, the grubbing may be incomplete and the soil, reduced to dust by the machine, will compact to the first rain!
Tip: Then let the ground take the sun, the herbs that have not been completely destroyed will dry up.
Leveling the soil

Using a fang or claw, remove the tufts of grass. Remove rooted plants, especially those with swiveling roots and broad leaves. There may be a few grasses left without any problems.

Level the ground to the hook or to the shovel to shave the buttes and to close the holes and finally to the rake to eliminate the clods, pebbles and roots. Use a lawn roller to get a properly packed seed bed.
Hint: Wait for weeds to emerge from the weed after they have been raked to destroy them more easily.

Sow the grass regularly

Choose a mix corresponding to the use of the lawn (amenity, games …).
Thoroughly mix the seeds to be sown because the smaller ones tend to fall to the bottom, the seedling would obviously not be uniform.

Hold the package or bucket with one hand against you and sow the other on the fly, throwing the seeds on the ground in front of you.

Advance in a straight line and always sow at the same pace: take a step, grab a handful of seeds, take another step, then throw away the seeds and so on.

Avoid sowing when there is wind!
To sow a large piece of land as regularly as possible, divide it into several plots using twine to better locate you.

Cover the grass seeds
For a less hazardous seeding, use a wheeled seed drill. It will be necessary to distribute about 40 g / m² of seeds, that is 1 kg for 25 m². After sowing, use a rake to bury the seeds under 1 cm of soil, no more. Rake superficially, once forward, then backwards so as not to risk moving the seeds.

Wear flat shoes so as not to leave traces in which the seeds tend to accumulate.

Skip the roller

Roll again the ground stirred by the rake to improve contact between the seeds and the soil and until there are no tracks of roll or pitch. The soil must be dry, otherwise the soil as the seeds will adhere to the roller!
Use a model of about 80 kg, the maximum average weight of people who will walk the lawn … Heat and humidity then promote a rapid seed lift. If the rain fails, water to keep the ground moist until the first mowing and beyond.

Ideally it would rain after planting, so in southern France, do not sow too late in the spring
First care of the grass after a sowing

It is important that the soil remains fresh. When you water, do it gently without causing puddles, rather often than abundantly. Simply use the sprinkler that will be used for the lawn.

Weed Control
Eliminate large-leaf plants that have nothing to do in your lawn by pulling them by hand or with a weeding knife.

Some seeds rise in 5 or 6 days, and the emergence is complete in 3 or 4 weeks. When the lawn reaches 5 cm in height, roll it to promote its implantation and the emission of new roots. The soil should not be moist.

First mowing

Mowing occurs when the emergence is complete and the strands are 8 to 10 cm tall. Set the cutting height to a minimum of 4 or 5 cm to help grass roots and pick up the grass in the basket. Pass the roll one last time to “rechausser” the blades of grass.

How to choose the best trimmer for your lawn ?

If a lawn in the garden is your trouble, a weed wacker will be the solution. This tool can help you trim and cut grass in the lawn. Nowadays, in the market, there are multiple branches of weed weaker with every feature. In general, there are three types of string trimmers: gas trimmer, electric corded trimmer and cordless weed wacker. The problem is how to choose the best cordless weed wacker or gas trimmer because getting a suitable one for your garden is a difficult job. You must know well about three types of weed wacker as well as have comparisons. The article will give a list to help you select the best product.

1. Consider the size of the area.

The first thing you should think is your garden which is the place that you use the string trimmer. Is it small or large? How wide is it? How far from the electrical outlets to the corner of the garden? If your garden is very vast and needs to be lost of movement to the far edge of the property, you should not use an electric trimmer, because this type of weed wacker will not work well if it is so far from the outlets. It is more suitable for this wacker if your garden is smaller. With a big yard, the more flexible product is the best option. The cordless weed wacker or gas trimmer may be better for you in this situation. You can freely move around the garden without the worry about the length of the cord.

2. Examine the grass of the area.

This is a necessary thing in choosing a strimmer. A cordless wacker is a bad choice if your garden has so many brushes and thick grass, because the power of this device is quite weak, compared to other types. It can not help you trim underneath as you want. In this situation, you should get an electric trimmer; it is stronger and more powerful. No matter how thick the brush is, this problem can be solved quickly.

3. Consider the type of weed.

As the article, there are three kinds of a trimmer; you should consider what kind of product that you want to buy. Every product has different features such as a cordless weed eater is more freedom and quickly to move around, an electric trimmer is cheaper, faster and easy to use, the gas model can work better on the bigger jobs. Therefore, you must consider what you need to decide a suitable one.

4. Test products.

This is an important step before you buy a product. You can come to a store to pick up a favorite model and test it. Let’s think about its weight and its looking. You can choose the light weed eater because it is easier for you to work with a light tool than a heavy one, especially in the big garden. If you do not want to lose too much energy to bring a big device around the large yard, you should find a light product which is suitable for you body.

5. Review the extra feature.

Every product has every outstanding feature that you should discover before buying. For example, trimmers have to handle-edging which helps you get clean lines along the edges of the sidewalks. Sometimes, there are some products which have a guard. This means it can protect the garden plan from cutting if you do not want to trim. The gas model usually has a see-through gas tank which lets you know when you need to refill or so on. Therefore, you can find some particular features which are necessary for yourself to do the garden.

In conclusion, finding a trimmer is not a simple job that you go to the store and take a trimmer by chance. With these steps, I make sure that you totally find the best suitable products for your demand.

The best framing nailers for yourself

How hard do you feel when hanging a picture on the wall? You need to prepare hammer, surveying ruler, and all about supporting tools for hanging pictures. Besides, it will be dangerous if you nail to hand and this mistake can hurt you and create the wound. At this time, a framing nailer will become a good solution. If you still hesitate in choosing the best one for yourself, do not worry! I will give you some information about three the best framing nailer to help you find a suitable one.

1. Hitachi NR90GR2 3.5 Inch Gas Powered.

Hitachi, the maker of one of our best pneumatic framing nailers. Therefore, it is not strange when I set this product on the top of the list. The Hitachi NR90GR2 has 3.5 Inch and is a gas-powered tool. Its weight is just 7.9 pounds, so it will be convenient for you to use. Despite being used without a cord, it still fires up to 4,000 nails on a single charge. The
It is easy for us to find the outstanding features of this product. First of all, we can be adjustable drive nose depth to make sure proper nail down on materials. Besides, the framing nailer operates by battery and fuel rod, do not depend on electricity supply, so it is very convenient and safe for you. Third, the speech of driving nails is very impressive. It can hit two nails per second and 1,000 nails per hour. Finally, with dry-fire lockout, the tool, and work surface can avoid the damage.
With these advantages, this framing nailer is suitable for short projects or quick repairs; you can buy a Hitachi NR90GR2 with the price of 299.99 dollars.

2. Paslode 902600 CF325Li Lithium Ion Cordless.

Like the Hitachi NR90GR2, Paslode 902600 is a cordless framing nailer, using a lithium-ion battery and fuel cell. With its design, Paslode is suitable for both homes and on the job with an incredible durability.
Paslode 902600’s features include the number of driving nails in one charge up to 6,000 nails. With this number of pins, you can freely use in your job. Besides, with a heavy-duty feature, this nailer withstands job site abuse and has enough power to do the job– no matter how big or small.
The Paslode 902600 CF325Li will be the best choice for people who need a serious framing nailer. Although the price of this product is higher than other pneumatic counterparts, it includes not only the nailer, but also a hard plastic carrying case, safety glasses, battery, 5/32-inch hex wrench, and a charger. You can get a Paslode 902600 with the price of 395 dollars.

3. Hitachi NR90AE(S) 3.5 Inch Full-Head.

NR90AE(S) 3.5 Inch Full-Head is another illustrate of the quality of Hitachi. This nail gun is an air-powered framing nailer. With the non-slip elastomer grip trigger, this tool fits comfortably in your hand, so it will be easy for you when using. Its weight is just 7.5lbs. Unlike Paslode 902600, this nailer does not have a carrying case, but have any protective features, keeping it from in incurring wear and tear damage.
In addition, when getting this nailer, you don not need to use a separate tool to alter that gun. Just by your hand, you can change the depth without a lot of time in grabbing a different instrument or adjusting on the air compressor. Another highlight of the Hitachi NR90AE has two firing methods; you can choose a sequential and contact nailing with the simple hit of a switch.
You can use Hitachi NR90AE for both professionals and amateurs, so let’s think about this nailer. You just spend 200 dollars to get one.
In conclusion, besides this information of three framing nailers: Hitachi NR90GR2, Paslode 902600 and Hitachi NR90AE which I just suggested, there are many other products in the market. Therefore, Let’s think carefully and choose the favorite one for yourself.

Astonishing advantages of the sliding miter saw

miter saw


You are a gardener eager to seek safety and high precision, or a carpenter who wants to achieve high efficiency at work, or a contractor investing in the miter saws with high accuracy and fast speed. The best sliding miter saw is the smart choice for all people with reasonable price to meet your needs.
To have a comprehensive knowledge about the sliding miter saw, please refer to the information below. They are advantages of the sliding miter saw because this product will always be with you even when you need it most.

What is the sliding miter saw?

The sliding miter saw is a kind of saws used to cut corners in wood or metal products in construction or even concrete. The sliding miter saw is primarily used to create the miters and crosscuts in a particular product. Moreover, it also brings products with high quality and perfect cuts. Therefore, people often use it to complete the building or interior decoration.
This saw gives the combination of two primary functions within one cut. It only has a vertical axis of rotation, but allowing the blade can cut both horizontally and vertically. Therefore, its cutting is more convenient than other types of saws.
It can provide excellent and accurate results, simplicity to use and high speed.

Advantages of the sliding miter saw
The sliding miter saw has many benefits for the user in daily routine life. Here are just a few short descriptions of some conveniences that it brings to us
A tool is not difficult to use
One of the biggest benefits of this tool provides is that we can implement as common items. Even if you never use it, you can cut any material you want. Sometimes, you meet some problems, but you do not worry about it, the first time is never perfect in all situations.
It gives the cleanliness of cuts
Surely, you will not be able to complete the work when you try to cut that product without the miter saws. Your final product is ugly and painful to accept. It makes you irritated. So, using a saw assures that it will be clean, no vestige, and no rough. This tool applies to all types of products which people can cut with a saw.
It repeats cutting ability
Undoubtedly, you have to spend a lot of time and effort when performing the same operation, but doing many different times on separate products. With the use of this valuable tool, you can shorten timeserving than you thought. It allows creating precise cuts in models without compromising the quality of the cut. The only problem is how you waste your time.
It reduces the dangerous levels for users
You absolutely can feel assured about the safety of using a saw reflected in its structure and the way to control machine’s operation
A part of the machine acts as a barrier. It appears when the head of saws is moving, so we can restrict dangerously as well as your hands to stick a blade suddenly. The safety is also one of the reasons that people prefer to use this tool
It is portable and easy to move around
Typically, many types of saws are heavy and too awkward for carrying around. Just a miter saw, you can solve this problem because it has experienced a series of improvements; the mobility has been launched to help complete that power tool.
You can take it around without ever having to worry or fret about the quality of the cut and its weight. It is also easy to serve your work everywhere and every when you can.


The saws are very popular in the market and in particular on the construction sites. Therefore, you are entirely easy to find and own a product like that, accordance with the need to use. When using it in a long time, you should regularly clean machinery, check the sharpness of the knife to achieve the highest efficiency.
Above are the reasons for you to own a sliding miter saw, an essential tool for cutting material frames, and other. This type of saw will allow you to be able to cut different pieces of wood with multiple widths. When choosing the best slide, you have to be very concerned about the specifications and capabilities of the cuts.


To people looking for convenient, low-impact workout, recumbent exercise bikes are a popular option. They are so widely advertised on TV, on the Internet and in the magazines that it’s possible you have already found yourself one given that there are many best recumbent bike 2016 reviews out there. We just have a variety of choices to choose from but since there are a lot of brands and types of recumbent bikes available, choosing one isn’t as easy as you think.

Too much of something can make one overwhelmed, you know?

In general, the low-cost ones have basic features such as a configurable workout resistance and a few programming options. Meanwhile, mid-range ones are of better built, cause less noise and give a more solid feel. As for the high-end recumbent bikes, it’s obvious that they will offer more advanced features, like a more precise and all-inclusive computer, preset workout programs, user profiles, long-time warranty and some resistance levels. With the intention of helping you picking a good stationary bike, here’s a list of features for your reference.

Recumbent Bike Features
Indoor-Bike Computer
Data Tracking

Such models like the Schwinn 270 Recumbent Bike come with computers that presenta whole lot of helpful information that allows you to track your fitness progress. You can keep track of time, distance, and calories goal so that you can realize where you’ve gotten at your workout and motivate you to push for higher goals. Better yet, some computers have the ability to switch between users as well.

Adjustment Of Resistance and Pre-Programmed Workout Options

To keep you entertained while working out, resistance is actually a designed game on recumbent bikes. You might want to come back for more as it provides a challenging yet achievable exercise session and in order to attain that you have to be able to quickly fine-tune your recumbent’s resistance level. Furthermore, plenty of recumbent bike displays give you total control over pre-programmed workouts and some are even featured a heart-rate monitor to help you get a cardio workout that is prescribed by your heart rate level goal. You will be challenged and keep coming back for more due to the advance of anumber of resistance levels and pre-programmed workout options. Some recumbent bike monitors also allow you to download your workout data to apps like MyFitnessPal so it’ll be easier to keep a running record of your fitness progress.

Fans and Speakers

Last but not least, if you want to listen to your own music while exercising some recumbent exercise bicycles also providespeakers and charging USB ports. Some even feature fans to cool you off. How nice!


Heavy flywheels are perfect for when you want to experience a realistic and lifelike road feel momentum. Therefore, companies have come up with perimeter-weighted flywheels for some of their models to further intensify and imitate the feeling of biking on a road in a soundless and smooth way.
Adjustable Seat Position
We all want to feel as comfortable as possible while working out that’s why I bet you will want a seat that can easily be adjusted to fit you and not the other way around.
As the manufacturer wants to show their confidence in the quality of their products, they will offer a solid warranty on a recumbent bike’s frame and parts. They expect that their equipment will be able to withstand vigorous use.
Weight Capacity
Today, most recumbent bikes can put up with users of at least 113kgs (250 lbs) in weight.


After you have considered all of the features above, you still have another thing you might want to think about before making an actual purchase: will a recumbent bike take up a lot of space? There would be no problem if your house is big enough . However, it’s a different story if you live an apartment and don’t have much space, then you would probably prefer a foldable bike when not in use.
And remember that though recumbent bikes can be the most effective machines you will ever buy, it won’t work out if you don’t enjoy the workout (pardon the pun). You have to enjoy it so it can provide you with the most comfortable experience. Actually, nowadays, the technology that features in these bikes will most likely make you not want to leave it.

Copyright Blog Home & sport & labeards.org 2017
Tech Nerd theme designed by www.labeards.org